PRODUCTS

Advanced Parachute Navigation Missions Systems Technology

The jTrax^® Navaid parachute navigation system is a device worn on an army jumper’s harness to aid in navigation to the intended Impact Point (IP).  The technology is the same that is utilized in our Guided Precision Aerial Delivery Systems (GPADS), ensuring accurate and proven technology. The Navaid improves safety and increases effectiveness of military jumpers by providing accurate navigation for even the most demanding missions.

Reliable Even At Extremes

The jTrax^® Navaid parachute navigation system includes:

• one pilot unit
• one display screen
• one support board or harness
• one back-up compass (optional)

The jTrax^® Pilot Unit has been specifically designed for the military free fall mission. The ruggedized module uses a proven sensor suite derived from the avionics of the Airborne Systems family of Guided Precision Aerial Delivery Systems (GPADS).  Various adjustable settings allow the user to configure the display based on the experience of the jumpers and the requirements of the mission.

Durable Display

Three types of screens can be displayed to the jumper:

• Jumpmaster screen to be used on the plane to check the progress of the flight toward the release point.
• Navigation screen to be used under canopy to guide the jumper towards the landing zone.
• Map display of the area below the jumper during the flight under canopy.

Successful, Safe Missions

The jTrax^® Navaid parachute navigation system can have one primary target and two alternate landing targets. A push button located on the jTrax^® Pilot can be activated with gloves to allow the jumper to rotate through screens and landing areas. The jTrax^® Navaid is fully integrated with the jTrax^® Mission Planner software developed by Airborne Systems for GPADS and Military Free Fall operations.

Adaptable Mission Planner Software

The jTrax^® Mission Planner is proprietary software that provides mission planning for military freefall jumps well as guided cargo drops.  It allows the user to select mission parameters such as payload weight, canopy, aircraft type, release altitude, speed, heading, and IP location.  The Mission Planner automatically downloads wind data and plans the mission for optimum release point taking into account failure footprint.  The user can then change to desired release points and assess the reliability of alternate plans based on wind conditions, parachute performance and arrival altitude.  This allows customization to meet complex mission parameters without increasing risk due to unknown trajectories or parachute performance.  The planned mission can then be simulated and output to Google Earth for visualization and terrain assessment.

The PS-2 Multi-Mission Parachute System is the latest High Performance Parachute System offered by Airborne Systems. The PS-2 features a harness container that is capable of both bottom-of-container pilot chute deployment and drogue fall deployment methods. The drogue system utilizes a new center of pack mounted drogue release with several key features:

• Flat jumper position while in droguefall
• Inherently safe design causes drogue to release if the Main container opens
• Two stage drogue collapse eliminates the “Trap-Door” effect when the drogue is released
• New proprietary drogue design is stable and consistent during droguefall

The harness container incorporates eight attachment points including high attachment points with outboard handles to provide the user the maximum ability to customize equipment attachments. Additional attachments include oxygen and radio pouches that can be set up on either side of the jumper. Specially designed air vent padding ensures the Harness fits the jumper comfortably while maintaining maximum airflow to cool the jumper. Primary and secondary drogue release handles are located in standard positioning to ensure easy transition for qualified jumpers.

PS-2 is currently offered in two sizes, 300 and 370 square foot canopies. A K9 harness is also available for any configuration. Each of these sizes use the Hi-5 canopy as the main and reserve. The Hi-5 canopy is best known for its outstanding glide modulation system. The Hi-5 features a remarkable 5:1 glide ratio and can transition to a 1:1 glide ratio with a simple control input using the Glide Modulation System.

SPECIAL OPERATIONS LONG RANGE OXYGEN SUPPLY

The SOLR^® 3000 bailout bottle is the latest parachutist oxygen system designed by Airborne Systems. When used with a parachutist oxygen mask, it is suitable for the most extreme HAHO / HALO missions. The 122 cu.in. oxygen bottle has similar measurements as the current PHAOS 120 cu.in oxygen bottle but offers over 60% more oxygen capacity for increased flight duration under canopy.

SOLR^® 3000 AND SOLR^® 4500 KEY FEATURES

• Lightweight
• Available in 3,000 psig and 4,500 psig fill pressure
• SOLR^® 3000 – Over 60% more oxygen with the same bottle measurements as the 120 cu in PHAOS
• SOLR^® 4500 – 50% more than SOLR^® 3000
• Brass pressure reducer, oxygen safe up to 4,500 psig (tested @ 5,395 psig)
• Universal compatibility
• Low profile oxygen gauge
• Secured output oxygen flow
• Easy oxygen gauge visibility
• Console interface includes automatic shutoff feature when connected to the console
• Manifold is 50% smaller and ensures no measurable oxygen leaks
• The double action rotating toggle oxygen switch eliminates unintentional oxygen flow shutoff for increased safety
• Compatible with U.S. Army POM mask

Portable Parachute Oxygen Systems Console for Military Missions

The Parachutist Oxygen Console (OXCON) is a lightweight parachute oxygen system used in HAHO / HALO missions around the world for over 25 years. With a portable, multi-station system, it is designed to contain and distribute regulated oxygen for pre-breathing onboard a military transport aircraft as a supplement for the man-mounted PHAOS parachute oxygen systems.

The multi-station manifolds provide quick connects on each side of the housing. Each side has a low-pressure gauge to allow monitoring of the regulated outlet pressure. Its components are contained within a compact, rugged structure that can be easily installed for missions requiring oxygen.

The 8-Man OXCON is tested and certified for use by the U.S. Naval Air Warfare Center.

Meeting the Challenges for High Altitude Parachutists

• 8-Man configuration
• The manual on/off valve is rated to 5000 PSI heavy duty service
• Monitor the constant system pressure of 70 PSIG with the in-line flow indicators
• Rugged construction, with protective guards around controls, gauges and connections
• Stainless steel fittings for easy maintenance
• High pressure gauge indicates the available supply pressure from the pressure reservoirs

Parachute Oxygen Systems Specialized Components

All parachute oxygen systems components have been designed or selected to conform to the relevant requirements of applicable military/government specifications:

• MIL-G-8402 Gauges, Pressure
• MS33649-8 Cylinder Port
• MIL-H-81581 Hose Assembly, Breathing Oxygen
• MIL-S-7720/QQ-S-763 Fittings
• MIL-R-17852C-Reducer, Oxygen Pressure
• ASTM A269 Tubing
• DOT FRP-1 Std.; Type 3FC Cylinders under DOT-E-8162-1850

Rugged, Reliable, Rechargeable OXCON Parachute Oxygen Systems Equipment

The 8-Man OXCON 3000 components are contained within a compact, rugged and reliable structure. It can be easily installed for missions requiring oxygen and can be recharged simply without disassembly and cleaning. Its rugged construction allows for extended service life in the field.

Medical Grade Regulator

The 8-Man OXCON 3000 Oxygen Console incorporates the proven design of a regulator developed for use in the commercial life support and medical oxygen-handling field.  The regulator, mounted beneath the console’s top side servicing panel, reduces the internally mounted supply cylinder pressure to provide a constant, usable system pressure of 70 psi. (4.8 Bars). The manual on/off valve is rated to 5000 psi (344 Bars) heavy duty service. The multi-station manifolds mounted beneath the enclosure panels provide quick connects on each side of the 8-Man OXCON 3000 housing.

Safety “All the Way!”

• A low pressure system-monitoring gauge is provided on the servicing side manifold, conveniently located near the quick connects. The system charging valve is located near the on/off valve and high-pressure monitoring gauge.
• Three pressure indicators are provided with the 6-Man OXCON 3000. A high pressure gauge indicates the available supply pressure from the pressure vessels. Two low-pressure gauges (one on each side) allow monitoring of the regulated outlet pressure at the quick connect manifolds. Both gauges conform to Military Standard (Mil Std.) specifications.
• Protective guards are provided around control gauges and connections to minimize the risk of impact damage during handling.
• The 8-man OXCON system includes 7-120” hose/flow blinker assemblies, 1-216” hose/flow blinker assembly, 1-oxygen charging assembly and 1-purging valve assembly.

Additional Parachute Oxygen Systems Products

The Airborne family of personnel oxygen systems for military jumpers also includes:

• SOLR® 3000 and SOLR® 4500
• SOLR® Oxygen Booster Pump
• SOLR® Oxygen Mask

Safe Oxygen Booster Pump Air Systems

The SOLR^® Oxygen Booster Pump for army jumpers can be used safely and efficiently to fill high pressure oxygen systems to pressures up to 4,500 psi.

Although designed to be used with the SOLR^® 3000 and SOLR^® 4500 high pressure parachutist oxygen systems, the SOLR^® Oxygen Booster Pump is also compatible with legacy equipment including the PHAOS and PHANTOM systems.

Air Boosters for HALO / HAHO Military Missions

• Three high pressure outlets preset at 3,000 psi.
• One low pressure outlet preset at 1,800 psi.
• All outlets can be adjusted by the end user to provide fill pressures to 4,500 psi.
• Brass high pressure manifold
• Electrically-driven pump
• CGA 540 inlet connector
• Two position adjustable inlet shut-off valve
• Two-stage design
• Two Safety Relief Valves for high pressure and low pressure outlets
• Seals rated at 10,000 psi.
• Non-lubricated drive section
• Sealed bearings
• Cooling fan and finned intercooler
• Fills oxygen cylinders at nearly ambient temperature*
• Digital hour meter to track service life
• Easy maintenance (see service schedule)
• Weight: approximately 165 lbs. (75 kg)
• Dimensions approximately 45” x 19” x 20.5” (114 cm x 48 cm x 52 cm)

* Because temperature increases are a safety hazard during oxygen replenishment, the thermal stability provided by the SOLR® Oxygen Booster Pump virtually eliminates fire hazards when filling pressurized systems.

Oxygen Booster Pump Capacity

The SOLR^® Oxygen Booster Pump is factory preset to fill:

• three systems to 3,000 psi (e.g. bailout bottles) and one system to 1,800 psi (e.g. oxygen console)
• four systems to 1,800 psi.
• can be easily adjusted to accommodate filling to any pressure up to 4,500 psi, whether on special request at the time of the order, or directly by the end user.

Additional Oxygen Booster Pump System Products

The Airborne family of personnel oxygen systems for military jumpers also includes:

• SOLR® 3000 and SOLR® 4500
• Oxcon
• SOLR® Oxygen Mask

Supplemental Parachute Oxygen Mask

The SOLR^® Parachute Oxygen Mask builds on the reliability and strong features of its predecessor, the Airborne Systems’ PHAOS Oxygen Mask, the current reference for the parachutist oxygen masks used by Military Units worldwide. 

The SOLR^® Oxygen Mask is compatible with the new SOLR® and legacy PHAOS Bailout Bottles. It is also compatible with the PHANTOM Bailout Bottle. 

New and Improved Parachute Oxygen Mask

The SOLR^® Oxygen Mask provides the same performance and time proven reliability as the PHAOS Oxygen Mask, with the added benefit of new features developed based on input received from experiences collected over the years from the Military Free Fall community. 

The SOLR^® Oxygen Mask features a new non-dilution oxygen demand regulator which delivers 100% oxygen during inhalation, both during pre-breathing and during the actual jump and descent under canopy.  This ensures that the jumper is never breathing a mix of gas and mitigates the risk of hypoxia, drastically increasing the safety of operation.  This breakthrough innovation is made possible thanks to the very high service pressure of Airborne Systems’ latest Bailout Bottles, allowing them to contain significantly more oxygen than traditional Bailout Bottles. 

Versatile and Comfortable Parachute Oxygen Mask

• Lightweight 
• On demand regulator, no dilution (100% O2) 
• Modular (dilution module optional) 
• Compatible with SOLR® / PHAOS / PHANTOM Bailout Bottles 
• 5 sizes (from the 3rd percentile female through the 97th percentile male) 
• Compatible with all parachutist helmets on the market 
• Easy maintenance 

Its black soft silicone shell has a lower durometer than the traditional harder gray silicone shell found on other Oxygen Masks and was specifically developed to improve comfort over extended period of use. 

Safety as a Priority

The SOLR^® Oxygen Mask is equipped with an automatic Anti Suffocation Valve that opens up automatically when the jumper’s Bailout Bottle is empty or disconnected from the mask. It allows the jumper to breathe comfortably throughout the total descent, even after all oxygen is consumed. It also provides facial protection for inadvertent landings in brush and trees. The SOLR® Oxygen Mask eliminates hoses and connectors on the front torso providing the parachutist with a “clean front” thus improving vision and mobility.  

It provides a secured and adjustable seal to the jumper’s face. It can be easily and rapidly detached by the jumper himself or by another user assisting the jumper in case of emergency. The SOLR^® Oxygen Mask is also equipped with a standard M-169A/ AIC microphone that can be connected easily to the parachutist’s communication equipment. 

Additional Oxygen System Products

The Airborne family of personnel oxygen systems for military jumpers also includes: 

• SOLR® 3000 and SOLR® 4500 
• Oxcon
• SOLR® Oxygen Booster Pump 

Low Cost Aerial Cargo Delivery Parachute

Airborne Systems designs and manufactures a low cost cargo delivery parachute that can be utilized as a one-time parachute system or repacked in as little as 1.5 hours and reused as necessary. The Unicross military parachute is durable for training and its modular design allows panels replacement without sewing. This results in reduced costs for assembly, training and maintenance. 

Modular Design

• Easily assemble or make repairs in the field without sewing. 
• Eliminates the requirement to recover the deployment bag into the aircraft with the release-away static line. 
• Reduce costs on assembly, training and maintenance. 
• Re-use panels from recovered parachutes to build new systems. 
• The Unicross comes in three different sizes: 150, 500, and 2200. See chart below for more details. 

Efficient and Sustainable

• Economical solution throughout:  Each part of the system is designed with cost efficiency in mind (Canopy, D-bag, Riser, Cargo container slings) while allowing for multiple re-use.
• Easy drop: The release away static line eliminates the requirement to recover the deployment bag into the aircraft.  Also, the Unicross can be dropped from any cargo ramp and paratroop door equipped aircraft.
• Enhanced material for more robust overall product:  Multiple use cargo parachute.
• Easy tie-in panel construction:  The UNICROSS parachute is built with two types of interchangeable panels (crown and wing panels). It offers a considerable reduction in maintenance time and repairs can easily be made in the field as no sewing is required.

Atlas PR-A2 Parachute Release

Complementary to the Unicross parachute system is the Atlas PR-A2 Parachute Release, a mechanism that separates the parachute from its cargo upon landing. 

Versatile One-time Use or Quick Repack

Its design is particularly suitable for humanitarian drops and war-related operations when the recovery of the parachutes is not practical. These include, but are not limited to the following: 

• Food and water resupplies 
• Medical supplies 
• Makeshift drop zones 
• Drops over water 

Although more economical than a classic cargo parachute, the Unicross can be reused (up to five times) and its design ensures reliable openings and stable descent of the payload. 

Cargo Delivery Parachute – One-time Use Airdrop System

The 2K1T is a lower cost, one-time use ram-air cargo delivery parachute. This unique one-time use military parachute complements the FireFly® system and is part of the Airborne Systems family of Guided Precision Aerial Delivery Systems (GPADS).

The Firefly® was selected as the system of choice by the US Army as part of the JPADS 2K Program and is currently being used in operational theaters delivering supplies and equipment to forces in remote locations. The 2K1T parachute is modeled after the Firefly® parachute, but is constructed using alternative material and manufacturing processes to reduce cost without sacrificing performance.

2K1T Operation is Easy As 1-2-3

To place the system into operation, the user only needs to attach the 2K1T canopy to the FireFly AGU, rig the system to a payload, enter in the Gross Rigged Weight of the system, and program the location of the Impact Point. The 2K1T parachute does not need to be recovered, thus reducing the equipment cost of delivering supplies using GPADS. The 2K1T Parachute has the same technical performance and capability as the FireFly® parachute.

Enhanced Flexibility and Lower Cost for Precision Airdrops

• Add flexibility and increase options for the commanders in the field.
• Enhance the safety of ground forces by eliminating the need to recover the parachute.
• Rated for loads up to 2,200 lbs. (1000 kg).
• Drop from high altitudes up to 17,500 ft. AMSL with a 20 km stand-off (in zero wind condition), for an accurate landing within 150 meters of the pre-defined impact point.
• Eliminate maintenance, training and rigger support, as it is delivered packed ready for deployment requiring only simple rigging to the payload.
• Lower cost of equipment thanks to innovative use of fabric material and construction methods.
• This pre-packed ready-to-use parachute goes with the FireFly® AGU and autonomous navigation software.

Compatible with other GPADS Products

The FireFly® uses the same system architecture with respect to user interface and rigging as the entire family of Airborne Systems GPADS products.

Army Cargo Delivery Parachute for Light Loads

The FC Mini cargo delivery parachute is a smaller version of the FlyClops 2K, for payloads between 200-500lbs. Like the FlyClops 2K, it is a complete system, delivered packed and ready for deployment. It weighs just 11 pounds, and features a removable battery for easy charging and replacement. We are proud to offer a system that reduces the cost of a standard GPADS system. By incorporating proven technology with innovative design, Airborne Systems has created an easy to use and reliable system that meets the needs of the modern warfighter.

The FC Mini is a low cost, one time use Guided Precision Aerial Delivery System (GPADS).  It provides the ability to accurately, remotely and safely deliver equipment, ammunition and other must-have supplies to Forward Operating Bases (FOBs) and/or hostile geographical locations, without the burden of recovery and retrograde of the GPADS system.

Military Cargo Delivery Made Easy

• Parachute and AGU can be stored up to 5 years prior to use.
• Lightweight, 11 lbs. (4.9 kg)
• Delivered ready to use.
• Max release altitude of 24,500 ft. MSL (7468 m)

Airborne Guidance Unit

• Lightweight: 11-lbs including the battery (standard MicroFly® AGU weighs 42-lbs)
• Compact: 10.75” x 7” x 5”
• Wood enclosure minimizes potential IED materials
• Removable battery for easy recharging and replacement
• Single actuator for easy canopy control
• Standard LCD/Keypad interface
• Commercial GPS Parachute System
• Flight performance identical standard MC-4/5 military freefall canopy
• Deployed by release away static line (RASL)
• All deployment components are retained to system
• Low-cost materials (similar to 1T 2K canopy materials)
• Maximum release altitude: 24,500 ft. MSL.

Superior Flight Software

• Airborne Systems Flight Software
• Option to automatically clear all data and render AGU unusable immediately upon landing
• Option for handheld remote control
• Compatible with USAF CAT airdrop mission planner software
• Terrain avoidance supported via Airborne Systems jTrax®Mission Planner software
• Accuracy: 60-m Average, 100-m 80% CEP 113-m 90% CEP

One-time Use Cargo Delivery Parachute System

The FlyClops® 2K is a unique, low-cost, one-time use Guided Precision Aerial Delivery System (GPADS) solution that eliminates recovery, maintenance and support requirements for payloads between 750-2200lb (340-998kg). The FlyClops® 2K is a complete cargo delivery parachute system that is an alternative and low-cost option to our standard FireFly system and includes:

• One-time use GPADS
• One time use 2K1T canopy

Once deployed, the system need not be recovered. The reduction in initial cost and the life cycle resource savings provide added operational flexibility.

GPADS Capability

• Supports operational payload between 700 – 2,200 lbs. (317.5 – 998 kg)
• Lightweight, 72 lbs. (32.7 kg)
• Max release altitude of 17,500 ft. (5334 m)
• 2K1T Canopy

Precision Airdrops Made Simple

FlyClops 2K® can glide up to 25 kilometers after being dropped, and will land within 150 meters of a designated Impact Point (IP). This horizontal and vertical separation between the delivery aircraft and the unit receiving supplies increases safety for the air crew and improves security for the receiving unit. The ability to autonomously deliver supplies reduces the need for vehicular traffic, reducing the logistical footprint and the number of convoys required to sustain a deployed force.

Ease of Use  

The FlyClops® 2K is delivered packed and ready for deployment, and requires only simple rigging to the payload.  

2K1T Option – Reduce Cost, Improve Flexibility

The 2K1T parachute delivers the same high performance and capability as the FireFly® parachute, but is designed to enable the soldier to cut the payload and guidance system free, leaving the parachute behind. Using the lower cost 2K1T parachute reduces the equipment cost of providing aerial supplies using GPADS should operational constraints dictate that the conventional FireFly® parachute cannot be recovered at the time. This option provides greater operational flexibility to commanders in the field.

Cargo Delivery Parachute Mission Planning

The FlyClops 2K® is compatible with the jTrax® Mission Planner and the U.S. Air Force Consolidated Airdrop Tool Mission Planning Application (CAT MPA).